My Monogram C-47 Build!

Modeling Subjects Aircraft
1

Hey guys. I’m a vet that served with the 101st Airborne so obviously the history of the Screamin’ Eagles is something I hold pretty near and dear. Anyway, after seeing some jaw dropping diorams on here, I decided to give this a whirl myself. So here’s my C-47 I’m working on. Not nearly as talented as some of you guys. But believe me I’ve come a loooooong way from the F-16 Thunderbird I built back in middle school that eventually collapsed because I REFUSED to let the glue dry properly lol. Anyway, constructive criticism and suggestions always welcome. I have a 6 month old little guy, so I’ll try and post as soon as I can, but as you other fathers know, we work on their schedule! [t$t]

So, obviously starting with the interior. Normally I tend to just “flat black” every little piece in this part and even leave stuff out, as I never see it once it’s complete, but I decided to put a some more effort into it this time. The glue got a little outta hand in some spots, but, I’m ok with the turn out, being my first go around. More to come soon!

2

I like it! This is a kit I’ve always wanted to build. Poor radio operator…at least give hime a couch cushion to sit on!

3

Ooo! I’ll be watching this one! I love Revell/Monogram kits and this is one that I’m so tempted to get. Were it not for the fact that I already have about 25 kits in my stash, I’d have snapped up the C-47 by now.

As a dad of two young daughters, I TOTALLY understand what you mean when you say you work on your kids’ schedules. I remember those days when my little ones were 6 months old. Oh, and congratulations on your little guy, too! :o)

Eric

4

Currahee. I’m also a “Screaming Eagle”. I requested the 101st because I had an uncle that was in the “Battle of the Bulge” with the 101st. If you ever get the chance to go to Belgium go during the week that they celebrate the liberation from the Germans by the 101st and the 82nd airborne. That said, keep going on the C -47. It is a good kit and needs very little filling. I filled the wing to fuselage joint with sheet stock and stretched sprue. That was the largest gap to fill if I remember correctly. I’ll throw out two pieces of advice, as a 60 year modeler, and that is make up your mind to finish ant model you start no matter what happens, and secondly if you ever build the perfect model it is time to quit. No surrender, no retreat, and never say die!!! Rangers lead the way.

5

@Rotohead: Haha the black on the stool was supposed to be a cushion. Eric thanks for the well wishes on my son! He keeps me busy that’s for sure, but the last 6 months have been AMAZING! Anyway, if you can, I say definitely get this model! It’s a lot of fun so far, and I loofa working with the 1/48 scale. It’s kinda beasty, but being a C-47, this is the only way to go! RangerJ! HOOAH!!!

6

Ok, so I got a lot of painting done and even a little bit of detailing as well!

Here, I just finished putting in the fuselage windows. I won’t mention how much thought I put into when to install these windows so as to find the easiest way to avoid painting over them lol [|-)]

Here I have the top and underside of the wings, I went with the “gull grey” version for the belly

I’m just about done with the interior. I was gonna go all out on the seat belts but decided against it because it meant another store run. With all that stuff being only on the inside, it just wasn’t worth it to me considering how incredibly tedious it would of been!

Here’s some work on the engines, propellers and landing gear.


Well so far so good. More to come!! [t$t]

7

Nice work so far. What are you planning for the dio. For the D-day GB last year, one of the guys built a 48th C-47, I think it was the same kit. He depicted an aircraft about to board its load of Screaming eagles. His completed pics are this page, hope you find them interesting and useful.

cs.finescale.com/…/154026.aspx

8

Thanks Bish. Yeah that’s a pretty sweet model there and definitely helpful! I think I finally decided to go ahead and tackle the invasion stripes myself, to get the “haphazard look”. I also found a really cool chipping effect called “worn effects” acrylic. It’s supposed to work better than hairspray so I’m gonna give that a go tonight.

9

Look forward to seeing that. What brand is the worn effects.

There was a lot of discussion through that Gb about the invasion stripes, and the general consensus was that those applied for the 6th June were done at the last minute and were rather rough looking.

10

It’s made by AK interactive. A guy on another forum did a whole tutorial on how it worked, and after seeing the results, I was blown away. Check out the link! privateerpressforums.com/showthread.php

11

If you are still interested in doing seatbelts, just use some masking tape. Stick it flat to something you can cut on (a piece of glass or plexi works great. Then just use an exacto to cut it into thin strips, paint it, and stick it on the benches. The other thing you can do (if you can’t get the tape to fold up right) is use wine bottle foil. Just cut it and ball it up, straighten it out and fold to shape before painting.

Looks good so far!

Groot

12

Looking good there airborne. I might suggest some drybrushing of aluminum in the troop compartment on the floorboards and seats to suggest some wear. This build is right up my alley.

13

Right, thanks. I use a lot of their enamel products but have not tried their Acrylic line.

14

Great work so far! I picked one of these up last year. When you get to it can you take a picture of the wing to fuselage fit on the belly? I dry fitted mine just for something to do one day and it seemed like a pretty good gap there. Maybe I wasn’t holding it right either. Just curious to find out from someone else.

15

Thanks Rob! I’d already sealed the fuselage by the time I read your comment. I’m not too familiar with dry brushing anyhow, but I’ll be looking into it soon with my next model. But thanks for the advice! [Y]

Psycho. Thanks bud, I’ll get that pic for you when I get to that part. It looks like it should be ok, but I’ll tell you right now the gap you need to be worried about is the one between the two fuselage halves! A few people have mentioned this already, but once the interior is installed and the two halves are connected, it’s like gap city all around. I dry fitted mine like 10 times, I was able to close most of them prior to gluing, but it’s still gonna take some manipulation. I should of gone with my first thought-- initially I was gonna leave the entire interior outside of the plane, to give the inside it’s due presentation, but decided not to at the last minute. When you build yours, I say leave the entire interior out, dress it up REALLY nice and make it a separate piece from the plane. It’ll pay off big time with connecting the plane and all the hard work you did on the inside won’t have to only be seen by way of pictures. [t$t]

Bish. Yeah my hobby store here was sold out of all of the acrylic because they’re going out of business, so I went with the ol’ hair spray method. Crazy me totally forgot to seal the chipped parts with the flat finish, before applying the hair spray, but thankfully, I was only working on the propeller blades at the time. It actually didn’t turn out too bad! I had to touch it up a little bit because it stripped down to the plastic color in a couple parts, but it was a super easy fix. [|-)]

Starting out…

Here, I was beginning to realize I forgot the flat finish, but as you can see, it wasn’t terrible.

Still, I wanted to touch it up, but then called it quits so as not to over-correct. Could of been a lot worse, but thankfully I have bunch of propeller blades from old “I give up” models laying around from way back when lol.

And then super random, but I thought you guys would like this. I put this in my little guy’s nursery since he has an aviator themed bedroom-- A Tuskegee Airmen version of the P-51D (I did the red tail markings myself), chasing a Messerschmitt 109. The aerodynamic bank the 109 is taking is a little ridiculous but working with fishing line with my arms in the air was painful and annoying as the 109 kept twisting about.

16

Nice work. I have never tried hairspray and not often seen it on aircraft. Nice chase scene there as well, though of course it should have the 109 on the tail of the Stang [;)]

17

Hahaha I won’t abide superior flying from a Nazi plane in my house! Anyway, yeah the hairspray deal worked well for the propellers but no dice for other parts. I have to repaint a couple things and do it again. It doesn’t look bad, but for whatever reason the chipping skipped over the aluminum base I put on and went all the way down to the initial gray primer. That was even with a flat seal and two coats of hair spray.

18

Note: The story of “Kilroy was here” is an interesting story. When he inspected a section of a ship that was being constructed he wrote “Kilroy was here”. GIs left that and the cartoon character all over the world. The press, especially Bill Mauldin the Army cartoonist for the “Stars and Stripes”, used it in many cartoons involving GIs, especially “Willie and Joe” cartoons. The U.S. Post Office very recently dedicated a stamp to Bill Mauldin. This is long over due. Note Bill Mauldin was a GI in the ARMY before the war started and all during the war. The GIs loved his cartoons, that is except Gen Geo. Patton, but Gen Eisenhower told Patton to leave him alone in no uncertain terms. This is also a great WWII story. Gen. Eisenhower was also a pilot, another little known fact. Paul Tibbets, the Enola Gay pilot, flew Eisenhower to a meeting in Malta and Eisenhower thought Tibbets was the best pilot he had ever flown with. From that flight Tibbets got the recommendation to lead the B-29 mission that would drop the first Atomic bomb. The flight to Malta was in a B-17 and was done at wave top level at night for security reasons. When they arrived the planes props were covered with salt from the sea water. Eisenhower was impressed with Tibbets flying skills.

19

Oh yeah, I know all about Kilroy. If you ever make it to Fort Benning or Campbell, you’ll find this guy drawn in almost any bathroom haha.

20

Tiny update nearing the end but all the “interesting” stuff is well under construction.

Anyway, I worked on the tires a little more, painted them rubber, then took a charcoal vine stick, grounded it up and rolled the tires in them to give them a more gritty look.