Hi Everyone
I would like to get a Tool something the would behave like a vice for holding a model while you build and paint it. Something that acts as a vice but may provide other possibilities when building an aircraft.
Thanks
Scott
Hi Everyone
I would like to get a Tool something the would behave like a vice for holding a model while you build and paint it. Something that acts as a vice but may provide other possibilities when building an aircraft.
Thanks
Scott
Here are some options, from a mail-order dealer I’ve had good experiences with for a long time: http://www.micromark.com/vises.html .
I’ve been using a basic Panavise for about 35 years. I inherited it from my father, who got it as a Christmas present from an uncle longer ago than that. I’ve given it a coat of paint, and straightened out the handle once (it got bent when, in a moment of over-enthusiasm, I whacked it a little too hard with a hammer). Otherwise it looks like it did 35 years ago. The only real drawback to the Panavise, so far as I know, is the price. (If you do get one, I recommend getting a set of the soft jaws for it. I haven’t found it necessary to fasten it to the workbench - but I’ve got another, slightly larger vise permanently mounted.)
The cheaper, similar-looking metal vise farther down the page looks to me like it would work fine for the vast majority of model building jobs. And I’ve ogled at the Dremel version in the shops several times; it looks like a good tool as well.
Hope that helps a little. You’re right: a reasonably good vise is a huge asset to a modeler’s workbench.
Good luck.
thanks jtilley
I recently found a need for a hobby vise because I will begin building a wooden ship model and will need the extra holding power.
I picked up this one at the Harbor Freight store for 14.99
It comes with a set of soft jaws. It also has a suction cup function.
This looks for all the world like a Panavise with a suction base - for a lot less money.
It should work fine if you have a smooth, non-porous work surface. A workbench top made of metal, formica, or even smooth, glossy-painted wood should be fine. If your workbench top is made of unpainted plywood or (like mine) MDF, though, the suction cup probably won’t stick.