Just got it new. It seems to pulse or vibrate at low speed. One Amazon reviewer said that it’s due to the way the motor is manufactured (?) It uses a pulsing DC power supply; is that the reason?
It’s really tolerable, just noticeable. It doesn’t seem to affect the smoothness of the bit rotation, just seems to twist in your hand a little. If I lay it down, I can see “torquey” little jerks. Is this normal? I might send it back if I can find more info.
Can’t recall if i have the 50/e or EF but i have not noticed any issues like that. Only problem i have found is that even at the slowest speed it still runs fast and melts the plastic when drilling. Glogs up the drill bits and tricky when drilling small holes.
It souldn’t be doing that ! I have a Harbor Freight unit that winds down to 1000 R.P.M. It’s still a little fast for plastic , but plugged into an old Portable Sewing Machine foot control I get it down to unimaginable slow speeds .
My control is probably at least forty years old . See , if you take care of your tools they take care of you . That Proxxon now convinces me I made the right choice . Besides Harbor freight is right down the road.
I don’t like to spend more than I have to for a tool . Now , I once spent a ridiculous amount for the " Best " scroll saw I could get . All the bells and whistles .Turns out the clearances were not right for what I was doing . The neck depth at 18" still didn’t clear when I was cutting out intricate patterns in wood .
I bought an old " semi - industrial " Sears model at a yard sale . Geez , it took two of us to put it in and get it out of the car . This thing has a throat depth of 30" ! Price .20.00 bucks ! The other one 250.00 Bucks .
You may have other Proxxon tools , that I don’t know .They are promoted by sight . profile and shape on craft shows and sometimes you’ll see their nameplate . That does not make them the " Best "
My definition of the "Best " is how long with good care , a tool does what I buy it for , and it continues to operate correctly , No matter how old or new it is .
Yes, the speed of DC motors are controlled by pulsing them on and off. The slower you run the motor, the longer the pause between pulses of electricity. DC motor will be damaged if controled by a potentiometer.
New isn’t always better . But if they sell you something else to make it even better then they Gotchya ! I like things simple and straightforward . Plug in , Turn on and Use .