Well as I originally indicated in your original post guaging intrest I siad I’d like to do a E13A Jake, well I tracked one down today, wohoo![^] Bummer thats its only 1/144 scale but hey thats life.
So please put me down for a “Minicraft Model Kits 1/144 Aichi E13A Jake”. I’m about 99% sure I’ll do it in french markings (1945-47) just the novelty.
Andrew
I would like in as well, but I don’t know what yet. I will have to take a trip to the hobby store when my SU25 is closer to being done, to see what catches my eye.
I would like to join in on the GB! Put me down for the Revell 1/144 E-2C Hawkeye.
Shameless bump! 
Hey guys, I have my model for this one now. After thinking about it for a while, I thought a Vigilante would be fun, and lucky enough the Hobby store had one. Although I prefer 1/48 scale, I realize it would be huge in that scale, so 1/72 is fine. The cockpit alone is made up of 32 individual pieces! I’m going to be working on this one for a while. Probably start after Cmas sometime.
Steven, I am already overloaded with GB’s but I like this. Put me down tentatively with the Roden OV-1C Mohawk John
Well you might need to drop me from the list as I am going to be relocating back home soon and getting back online will be a low priority. Plus the fact I still dont have any kind of camera yet to take pictures with.
So I hopfully will see you all soon.
Steven-please put me down for the 1/48 Accurate Miniatures F-6B Mustang.
Hey guys, we need a group badge(s)! Anyone got any good ideas?
hey guys, i wanna jump in on this one, my brother just got me a 1/72 accurate miniatures predator for christmas.
What do you guys think about this for a group badge?
I like the Group Build Badge ; Nice work [Y] ; Especially the pulsating flames coming out of the SR-71 Blackbird .
I’ve decided to start on the Mach 2 E-1B Tracer first , so I opened the plastic bag to check out the kit .
Typical of most Mach 2 kits is the little lugs on the inside of most parts which i’ll have to file down , I will dip the canopy halves in some Future to try and get it to look a little more clear .
Hopfully this afternoon i’ll get some interior grey airbrushed on the inside of the fuselage halves and some white on the engine nacelle’s and landing gear struts .
I think most of the work will be cleaning up each part and dry fitting , other than that it should be a straight forward build , [I hope] .
John
I think the group bade is great! Thanks for your hard work in putting that together for the group.
I like that Badge well done [t$t]
got started on the predator.
i drilled a couple holes with a pin vise to show the 3 correct lenses on the eyeball. the kit part just shows one really big one.
i used gap filling super glue for the cracks, im not very experienced at all with putty and even more unexperienced in 1/72. this model makes me miss my 1/35!
i also bent the pitot tube so i will have to scratch another one.
Well since I just finished a F-6A, F-6B/C and have a nearly finished F-6D, sign me up for a 1/48 Tamiya PR Mk. IV Mosquito. Going to paint it in the PRU Blue scheme. Though I won’t be able to start it for a couple of months, got 4 others in the works that are about 90% done.
Since it’s too cold to paint, I decided to start on the Predator. It looks to be a fairly simple kit, so hopefully it’ll go together quick. The front fuselage went together great with no seam. The rear however is another story, fortunately it’s on the bottom so it’s not that noticeable. The seams where the wings meet the fuselage are acceptable to me. The only construction problem I’ve created is where the MEK brush and a finger got together a couple of times and left partial prints. Here’s where I am as of today.
!(http://i568.photobucket.com/albums/ss122/lewbud/Eye in the Sky GB/FSMEyeintheSkyGB001.jpg)
!(http://i568.photobucket.com/albums/ss122/lewbud/Eye in the Sky GB/FSMEyeintheSkyGB003.jpg)
The two Predators rufioizgreat and Lewbud are working on are looking great , well done guy’s [Y]
I’ve made a little more progress on the Mach 2 E-1B Tracer
The cockpit sat snuggly in place , I thought it would be easier to fit and glue the engine nacelles/landing gear to the underside of the wings first and the overall fit wasn’t to bad .
The clear parts came up okay , after dipping them into some ‘Pledge-one-go’ [Future] ;
I have also airbrushed the leading edges of the wings , tail fins and radome flat black .
I’ve dry fit test the two fuselage halves and the wings into the fuselage together and everything seams to fit without any problems , so everything is progressing along nicely
John .
I thought I might try and be original by jumping in to this build with an MQ-1A Predator but no such luck with lewbud & rufioizgreat already well under way.
Anyhow not to worry, mine is the Platz version of the kit in 1/72 and from looking at the sprue layout it’s identical to the Acc Mins kit.
!(http://i31.photobucket.com/albums/c392/Finescale/MQ-1A Predator/MQ-1A_1.jpg)
Nice detail for a very small kit
!(http://i31.photobucket.com/albums/c392/Finescale/MQ-1A Predator/MQ-1A_2.jpg)
The low parts count should make for a quick (I hope) build.
!(http://i31.photobucket.com/albums/c392/Finescale/MQ-1A Predator/MQ-1A_3.jpg)
Nice thing is the decal sheet which has enough serials to allow for just about any Predator in the inventory.
!(http://i31.photobucket.com/albums/c392/Finescale/MQ-1A Predator/MQ-1A_4.jpg)
John,
Nice work on the E-1.
Darson,
It builds up pretty nice for such a simple kit. Platz is supposed to be coming out with a Global Hawk, can’t wait. Primered mine today, will hit it with some light ghost gray in the morning. Might be ready for decals tomorrow evening or Wednesday.