Another spraybooth question.....

Yes, another spraybooth [:D]

Now that I have my compressor, airbrush, and Simple Green to wash it, I want to build a spray booth. What kind of fan should I use? What would be the best between an oven fan or bathroom fan? Where should I put it? On top or in the rear of the booth?

Thanks again for sharing.
Spawney

Here’s all the info you need on building a spray booth:
http://modelpaint.tripod.com/booth2.htm

Venting out the back of the booth (cross-draft) is the best.

Mike

Thanks Mike. Just one last thing before I start buying stuff. If I plan to use acrylics paint, I don’t need to get an explosion-proof fan… or would it be better if I get an external mounted motor fan. In other words, if I plan to use only acrylics ( I’ll use enamels later… with another spray booth) would a bathroom fan be ok?

Spawney

theres one on mmwilson2 earthlink, do a google. i forgot the site :wink:

Spawney,

If you use acrylics and don’t thin with alcohol then a bathroom type fan should be alright. If you plan on spraying anything flammable through it I would opt for a squirrel-cage fan with the motor outside the airstream.

Mike

hey mike, what about a pc fan hooked up with a belt to a big fan? then hooked up up to some plywood? i have all those around so i can make it for free~~

1337,

I am not sure what you mean by hooking a “belt” to a big fan? [%-)]

Mike

something like a bike chain, so its like how a bike works, except instead of a pedal, its a moter, and instead of a back wheel, its a fan.

A computer fan has very little power and could not run something like that.
How about a box fan? You can put a furnace filter in front of it and it will catch the acrylic particles.

Mike

Aaarghhhh!!! I can’t find a stupid squirrel-cage fans…Is it for household uses or commercial uses? and what do you mean by “box fan” Mike?

Spawney

Squirrel cage fans are usually for commercial/industrial use. You can find a nice variety at the Graniger website or at your local Grainger supplier. Hope this helps. - Ed

http://www.grainger.com/Grainger/wwg/start.shtml

What do you use to thin your acrylics? If you use alcohol that is still flammable. If you only use water you willl probably be OK.

As Keyworth said, most people buy their squirrel-cage fans from places like Grainger.
They look like this:

A box fan is the kind that people use in the summer like this:

This type of fan would not really be able to exhaust outside though unless you put it in front of a door or window.

Mike

Thanks guys. I finally find a place where I could buy Dayton fan.
Spawney

thanks mike, i was thinking of an array.