Finally finished this Tamiya 1/35 Stug III Ausf. B.
It was a nice kit to build and paint, although lack of details here and there compare with the Italeri one.
This is an straight OOB kit with some added extra stuff. I added a rack on the back to spice up the model since it is to boring to be just like this. Sorry if the measurement of the rack is rather odd since I found very difficult to find a good close up and clear shoot of the rack. Mostly it is guess and make process.
Finally, thanks to my wife who patiently do her knitting next to me building this tank.
And always, comments and suggestions are definitely welcome.
The thing looks great, especially the stowage rack and gear on the rear deck. The weathering makes me think the model represents a relatively new vehicle in service in a dusty place, like Russia in summer. Great StuG.
It looks great i espically like the lower hull weathering and the rear. How did u do the lower hull if you dont mind my asking. Since im not sure how to do it for my Panther
Very nicely done! Your weathering is very well thought out and applied and the build looks very crisp.
Don’t be concerned about the dimensions on the rear rack. Considering that these were primarily slapped together by field maintenance crews, a little variation is normal.
My only suggestion (if it’s not glued down) would be to possibly think about flipping the rear spare track around to hide the ejector pin marks, but it’s only a suggestion.
I particularly like the way you’ve done the dirt and irregularities on the lower hull. Excellent technique!
I like the worn faded look you apllied and the rack is a plus with all the gear. The weatering is superb. I do agree with Foster’s comment about the track, thats the usual way I see them mounted. Thanks for sharing.
nice build, Ben[:D]-- i really like the coloring and weathering- tracks look real nice also-- i like the rack alot too,it is a nice touch-- would it normally be a field addition? if so, there would be variation in its exact look anyway-- nice job[tup]–treadwell
Thanks for the kind words, comments and suggestions guys [bow].
Chris
Yep, that is what I want the model to be, kinna somewhat fresh since most of the photos I can find of the Stug they all looks brand new or being ready to be send to war. The ones that already in battle was taken from a distance. I guess the camera men dont have a tele lense handy, plus the rack was all removed when they are in battle.
ron b
The weathering is done by spraying Tamiya XF-57 Buff mixed with thinner (20:80 ratio).
Set the airbrush @ 18 psi and spray from a foot away.
Purple_haze
I apply Tamiya liquid cement first to the surface. While the glue still wet then brush it with talcum powder.
Robbert
All of the stuff on the rack are not glued, and yes those ejector pin marks does look ugly doesn’t.
I think I’m going to cover that with putty.
treadwell
Yep, they are all packed that way and they are field addition like Robbert mentioned above.
I think they slap it on because they have to carry so much stuff before going to war.
Some photos showed them full up to the brim.
Oh very smart think thanks for the answer i might try that im stickin to a tamiya weathering stick since my parents dont wont me going out and wasting alot of money on these kits. I basically just have colored pencils paint and charcoal pencil for my weathring.
i love these little assualt guns they are tough looking yours is great, the stowage looks just right but i especially like the texuring you did on the lower hull and never knew about that technique you described but thanks for that i cant wait to try it. great job.
I have one of those weathering stick. To me they are not well suited for AFV, especially when you are trying to apply them under the hull. Very difficult to control and they are not cheap.
When I do modeling, I like to use the surrounding material I can find. The method I use cost you almost nothing, you only need your liquid glue which I’m sure you have, and something powdery (talcum powder or even baking soda may work). Using this method it is easier plus you have control over what you are doing.
Hey Carves, I like that! Don’t worry 'bout the rack. Field additions were alot of times made with whatever they had. You just got to know I like those chains. Aside of the spare tracks, I think it looks very good. Steve
Thanks Steve, in fact the chain idea was inspired by your latest tank. I was cought up seeing the rushty tow cable hook up and was trying to replicate it with a different object.
The chain it self I got in on sale at a women’s jewelry counter. For 5 bucks I got enough to make like 20 of those already made chains.[:D]
I’m glad I inspired you. That’s the way to keep the interest and the forum rolling. ======================================== That’s how I find a lot of my stuff. Sometimes it just shows up in the oddest places. Flea markets : a great set of miniature files for a buck. Sable brushes. Prefinished diorama bases, $.50. Dollar store: cheap spray paint, soft flexible nail files. Pie pans. $1.00. Hobby Lobby: the beads and necklace crafting area. (40% off coupon week) Cheap. Sometimes I just go drifting around trying to find unusual things that I can use or modify. The hook on the chain was made with sprue and superglue. Of course, “Time and Patience” is the major component.