Finished The Godzilla kit and the P-47’s. Started on the old Monogram Wright Flyer kit and the Testor’s rerelease of the old Hawk Spirit of St. Louis. I guess it’s a wishful thought for the good old days. - Ed
Right now, I’ve got my Revell Ferrari 360 Modena Spider that should have been finished already for the CBP #2, a Marvel Comics Silver Surfer that I hope to finish up for the upcoming CBP #3, and a Monogram 1992 Corvette ZR-1 Coupe that I just found as I was rifling through all my kits. What,[:0] only three?!? I must have some more hiding here somewhere or else I’m just slipping. [:p] Oh, yeah. There’s also the Airfix Yamaha 500cc motorbike that I’m “helping” my 4 yr-old daughter build.[;)]
Well, I suppose that’s a start.
[8D] I love these kinds of topics - especially in the “General Forum” so I can see what the armor modellers, car modellers, sci fi modellers, et al are up to!
I’ve got a 1/48 Hawker Typhoon waiting for decals to arrive. It’s my first venture into WWII modelling, as till now it’s been pretty much modern jets with some Vietnam era birds (and one 1950s jet) thrown in. Got the monogram kit off of Ebay and the decals were in rough shape, hence I’m waiting for the new ones. It’s all glossed up and ready for 'em!
I also have a 1/72 Hasegawa Harrier GR.3 that’s ready for decals - gave it its coat of Future tonight (but just found a small flaw that I had to touch up and now have to re-Future tomorrow). So it’s next step is also decals, but this time the kit decals are in good shape! I experiemented with preshading for the first time and overall I’m pleased with it. Excited to try it on something that’s not dark green and dark gray now!
Last but not least is a 1/48 F-15I - actually the Revel F-15E to which I’m adding the Cutting Edge resin conversion set (incidentally, Cutting Edge makes some darn fine stuff, and the folks at Meteor Productions are top notch!) and the Isradecals markings. The body is all together and just about ready for the first of its four colors. I’m just doing the last of the filling and sanding now - there’s not much of it to do at all, as it’s a good fitting kit, but that’s inspired me to be that much more meticulous with what I HAVE done!
Unfortunately, I have to move to a new place in the next couple weeks (the one I’m in now is being sold) so that will slow things down a bit. On top of that, I’ll be out at sea a couple times this summer before an early fall deployment so THAT’S going to put a crimp in the building… but I hope to have these three all done (and pictures posted!!) by then…
[:D] Hereis what is on the bench, they vary from barely started, to almost complete…Amt 51 Chevy, Amt 62 Catalina, Monogram 1/24 Huey, Revell1/72 Skycrane, Italeri1/72 OH-6, Special Hobby HIller OH-12, Amt 53 Vette, Revell 1/48 P-51D Mustang, Amt WWII Jeep, Amt 69 Cougar, Revell 35th Ann. Camaro, Monogram 69 GTO Judge, Monogram 55 Chevy conv., Amt 66 Ford Fairland, TV Batmobile from Revell Futura kit, Monogram 95 Vette Indy Pace car, Revell 67 Firebird, Revell 67 Vette, Amt 57 Chevy, Nonogram 1st ge. Mazda RX-7, Amt 63 Studebaker Avanti, Amt Ala Kart-new issue, Amt 71 Charger, Monogram 64 GTO, Revell 66 GTO, Amt 34 Ford street rod, Amt 60 Ford Starliner, Revell 60 Chevy, Tamiya Morris Mini-Cooper, Amt 58 Edsel, Monogram 66 Hertz Shelby Mustang, Revell 56 Chevy Del-Ray. Just a coupe of things to keep me busy.
Lee
Putting the finishing touches on a Tamiya 1/35 Panzer II Ausf. F. Making the base.
Empire miniatures, 120mm 15thc. Archer
Verlinden 120mm Lancer
1/48 Tamiya Bf109
1/48 Airfix B26
I’m struggling through an Airfix kit of the Bounty. Endeavor to percivere…
Just completed a 1/24 Ferrari GTO for the Community Build Project. Next are: A figure (tba) for the 3rd round of the CBP, a 1/144 Concorde (Revell), a 1/72 M50 Ontos, a 1/72 M1A1 Abrams, a 1/100 Boeing 727-100, a 1/35 Panzer II Luchs, a 1/35 IS-3, 1/144 Ilyushin Il-76, …
Having found their way next to my workbench, boxes of… 1/72 SR-71 Blackbird, 1/72 Me-163 Komet, 1/72 Mk IV ‘male’, 1/72 A7V (for conversion into post WWI tank), 1/24 Ferrari Testarossa and 1/32 MiG-15bis…
On my bench is a nearly completed East German T-72, painted in light green, black and light grey. Next to that kit is a JS-2 which is less than half built.
After I get these two kits finished I may build the Trumpeter Type 83 or the Revell/Germany “Fuchs”.
Titanic (1/350 Minicraft) that’s just a few hours away from being done.
1/32 Grumman Navy F3F-3 Biplane (the classic Monogram kit).
1/24 Davey Allison 1987 rookie year car with resin figure (Revell).
1/24 Monkee’s car (AMT/Ertl).
1/350 (MiniHobbiesModel) USS Spruance (DD-963) which I will make into the USS Caron (DD-970). MHM is just a repackaged Trumpeter.
hi , just at the moment i have the following , 1/35 zil 5 fire engine scratchbuild nearly completed ready for primer , PT 76 just started modifying it and correctingf small details from scratch , lastly for the local model shop to be displayed in the window ready for the 1/72 UBoat to be released very soon a E Boat in 1/72 by revell , bit of a mixture for me as i have not built any boats for 30 years , last one was fletcher class destroyer , cheers ian
I have a 1/32 Typhoon that’s waiting for paint (gotta go get it) and
A 1/32 P-40 that’s waiting for me to get motivated-It has warped engine panels and some other problems.
Just finished 250 GTO for last CBP and our local contest. Now I’m trying to focus on the F4U-1A Corsair that I’ve been working on for WAY too long. I’m at the painting stage, so the end is ‘in sight’. I’m having trouble getting a nice soft edge between the two colors though…
I’m building my first F4F-4, 1/48 scale Tamiya kit. I have carved this kit up to the point of no return. Complete scratchbuilt cockpit, remove all flight controls and reposition including trim tabs, lowering the flaps, scratchbuilt gun bays and guns, removing some panels around the engine, opening the cowl flaps. I may put an aftermarket engine in it, Aires has a nice kit of this engine for $40 (ouch[:(]). At the rate I am going my cockpit will have around 150 parts in it. I’m not sure how many parts will make up the entire model, A rough guess is somewhere around 500. I’m 2 months into this and figure another 4-6 months will be needed.
The only project that’s getting any attention right now is the Trumpeter 1/32 A-10A N/AW. I’m finally finishing up the cockpit after about 2 months (hey, it’s Verlinden, which I think is German for nightmare), and I’m starting work on the engine details, mostly scrathbuilt, but using the great resin TF34’s that came with the kit as a base. I hopefully will have the kit ready in about a month and a half, if all goes well.
By the way, congrats are in order for Robert, becoming only the second man to achieve the rank of guru on this forum. Good on ya!
