Hello fellas, Yesterday i got an Eduard P.E. for a B-17 that i am building, i got the exterior, interior and ammo P.E., i was working with the interior part and i screw everything up, i just wasnt able to fold the tiny parts, everything was just [censored]d up! now my question, its the first time that i work with P.E. and i dont know if there may be any special tools that may help me working with those things[V], how do you guys deal with the photo etched tiny little parts? any suggestion or tips are gonna be greatly appreciated.
Thanks so much…
[xx(][xx(][xx(]
My best regards
Hector.
[V]
There are tools on the market to deal with PE parts.
One of them is called the Etch Mate, I have no idea on the price, and personally don’t think I will ever have the need for one.
Some time ago when I started playing with PE parts I had the same problems.
I had no idea how too fold such small items, without squishing them into oblivion.
So I went to the local hardware store and bought my self 4 pairs of needle nose pliers, the type technicians would use.
They have no teeth, and are around 50 mm long in the snout, and around 4 mm across.
One pair I left standed, the other 3 I ground down with a bench grinder, one to 3 mm, one to 2 mm, and the last pair to around 1 mm across.
These give me the ability to fold extremely small parts, while keeping them firmly clamped.
For small right angle bends, the blade of your knife can be pressed into the ‘fold’ line, gently.
Hope this helps.
[:D]
On my first attempt on using P.E I used some very fine tweezers and a pair of small needle nose pliers. That 109 turned out great. Since the arrival of the new tools on the scene, I have purchased the Hold and Fold (£40), Etchmate (£50) and the Hold and fold bending kit. I have so much PE I felt I needed all the help I can get !