Hello all, just discovered this forum and am getting back into modeling after a 20 year vacation from it. I have never airbrushed before, but think that the results look fantastic! With that being said, I will be modeling WWII German armor (1/35) and am looking for an airbrush that is easy to use, easy to clean, double-action, gravity-fed and one that I can grow into as my abilities get better. I have read a lot of the prior posts talking about airbrushes and the consensus seems to be to get either a Iwata, Omni, or Badger. Of course opinions vary widely, but I do have a coupon for Michaels for 40% off. They carry Badger. What is a good a airbrush that will be able to not only paint nice thin lines, but also broad applications?
Any help would be great! [:D]
P.S. Also looking for a airbrush that would have no problems using PollyScale, Testor’s Model Master, or even Tamiya paints.
Hi Chester, welcome to the forum. Glad to have you here.
My personal choice for airbrushes is Badger, but Iwata (which includes Tamiya) makes great airbrushes. Glad to see that you are going to start with a DA brush, I really think that is the best way. I have a single action and a double action, and it just doesn’t feel “Normal” painting with the single-action brush anymore.
Iwata HP-CS and Omni 4000 seem to be the most popular around here, but there are a lot of Paasche guys to. I have an Omni 3000 (bottom feeder) and really like it.
Check prices at some of the online places like www.dixieart.com. In most cases their prices beat Michaels even with a 40% discount.
Have you given any though to an air source yet? I wouldn’t recommend the cans or propellant, they are just not really worth the effort.
you’re on the right track with the gravity fed double action for sure. i own an omni 5000 and the iwata hp-cs and prefer the hp-cs. however, the omni is about $35 cheaper than the hp-cs and the parts are much cheaper as well. just according to your mind set on this one my friend. whatever aibrush you decide on is gonna take much of the following ingredients: patience, perserverence, just plain logging time with it, a certain amount of chemistry skills (paint to thinner ratios and such), and practice, practice, and did i mention practice? you can get pretty much the same line with any of the 2 brushes and i’m speaking from experience as i have both and have used both. later.
i have a little advice myself: AVOID AZTEK LIKE THE PLAGUE!!!
i say get badger 155
I recommend you take a look at the Iwata Revolution HP-CR. It is typical Iwata quality at a low price of only $59.00 at web sites such as www.dixieart.com mentioned above. The Revolution CR is gravity-feed double action and the parts are few and easily replaced. I own several Iwata’s and I have to say that it is of the highest quality, most capable brand named airbrush in it’s price range. The learning curve is minimal, just a bit of practice is all you need like anything else to get used to the double -action trigger. It can spray moderate detail from fine lines of 1/16inch to 2inches wide; great for a wide variety of modeling subjects: cars, armour, aircraft (1/72nd and up), sci-fi…you name it.
I use my Iwata Revolution CR for all-around spraying and some detail work. Iuse an Iwata HP-C for fine line, tight feathered camo demarcation, special effects and weathering. Good luck in your airbrsuh hunting!
Oh yeah, I forgot to mention…like 1337 said; avoid the Aztek at all costs. Speaking of cost; owning an Aztek over the long run will cost you hundreds of dollars what with replacing nozzles, or the actual airbrush itself. Most here, including myself know from experience using one; that while you may initialy get pretty good results…this will be short lived, replaced by frustration and a delayed in-progress model on your workbench. I hate to “Aztek bash” but oh well…
Disclaimer: for the Lawyer (bean-counter types)
This has been my experiences with the Testors Aztek airbrush system and strictly my opinion. The views expressed are not shared by the Testors Corp…ya-da, ya-da, ya-da.
Your results may vary (not).
Happy modelling!
For what it’s worth, I bought an Aztek initially, liked it at first, then swiftly grew to hate it. It was just inconsistent, it would spray or not at it’s own whim. I ditched it and bought an Iwata Revolution, and have been extremely happy with it. It was cheaper than my Aztek also, it was win/win and I’m glad I bought it.
Chester,
Welcome to the forum. I’m glad you started with this post. I need a new airbrush as mine is so old it sprays mold!!! You will as I have been able to get good information from these modlers. They are the best!!!
Richard
Iwata Eclipse HP-CS is what I own, I have been modeling for about 8 months and this brush is excellent for learning, easy to clean, works well for everything you need to do and is forgiving, at least for me. It expensive but i think its worth the money.
Aztek airbrushes… now THATS an oxymoron!
man i hate them. initially, i used my 370, it was ok. then the nozzle broke. then it sat in disrepair for a while. then i bought a new nozzle. now i am going to replace the aztek.
As plasticmod992 mentioned, This has nothing to do with the testors corperation… heres the disclaimer…
This product is meant for educational purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. List each check separately by bank number. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. Do not use while operating a motor vehicle or heavy equipment. Postage will be paid by addressee. Subject to CAB approval. This is not an offer to sell securities. Apply only to affected area. May be too intense for some viewers. Do not stamp. Use other side for additional listings. For recreational use only. Do not disturb. All models over 18 years of age. If condition persists, consult your physician. No user- serviceable parts inside. Freshest if eaten before date on carton. Subject to change without notice. Times approximate. Simulated picture. No postage necessary if mailed in the United States. Please remain seated until the ride has come to a complete stop. Breaking seal constitutes acceptance of agreement. For off-road use only. As seen on TV. One size fits all. Many suitcases look alike. Contains a substantial amount of non-tobacco ingredients. Colors may, in time, fade. We have sent the forms which seem right for you. Slippery when wet. For office use only. Not affiliated with the American Red Cross. Warranty void if serviced by non-authorized personnel. Drop in any mailbox. Edited for television. Keep cool; process promptly. Post office will not deliver without postage. This can contains a head-enhancing device; do not shake vigorously. List was current at time of printing. Return to sender, no forwarding order on file, unable to forward. Not responsible for direct, indirect, incidental or consequential damages resulting from any defect, error or failure to perform. At participating locations only. Not the Beatles. Don’t try this in your living room; these are trained professionals. Nothing you see presented here actually happened. Penalty for private use. See label for sequence. Substantial penalty for early withdrawal. Do not write below this line. Falling rock. Lost ticket pays maximum rate. Nap was here. Your canceled check is your receipt. Add toner. Ceci n’est pas une pipe. Place stamp here. Avoid contact with skin. Sanitized for your protection. Be sure each item is properly endorsed. Sign here without admitting guilt. Out to lunch. Slightly higher west of the Mississippi. Employees and their families are not eligible. Beware of dog. Contestants have been briefed on some questions before the show. Limited time offer, call now to ensure prompt delivery. You must be present to win. No passes accepted for this engagement. No purchase necessary. May be hazardous to health if consumed in excessive quantities. Not responsible for typographical errors. No returns unless defective. Processed at location stamped in code at top of carton. Don’t even think about parking here. Shading within a garment may occur. Use only in a well-ventilated area. Keep away from fire or flames. Replace with same type. Do not put the base of this ladder on frozen manure. Approved for veterans. Booths for two or more. Check here if tax deductible. Some equipment shown is optional. Price does not include taxes. No Canadian coins. Not recommended for children. Under penalty of law, this tag not to be removed except by consumer. Prerecorded for this time zone. Reproduction strictly prohibited. No solicitors. No alcohol, dogs or horses. No anchovies unless otherwise specified. Restaurant package, not for resale. List at least two alternate dates. First pull up, then pull down. Call toll free number before digging. Driver does not carry cash. Some of the trademarks mentioned in this product appear for identification purposes only. Objects in mirror may be closer than they appear. Record additional transactions on back of previous stub. Unix is a registered trademark of AT&T. Do not fold, spindle or mutilate. No transfers issued until the bus comes to a complete stop. Package sold by weight, not volume. Your mileage may vary. This supersedes all previous notices.
1337,
Are you on medication or maybe you need to be medicated? [%-)]
Mike
[(-D][(-D][(-D][tup]
Hehe, that’s funny to me.
Reminds me of a George Carline bit.
1337, you sounds like an attorney.
[B)] <---------well i’m probably gonna get one but, here goes…
when i took the leap and ventured into the world of airbrushing, (an inevitibility if your modeling confidence/ability is ever to grow) Aztek did not exist, Iwata and some other exotics were unknown so, my only two choices were Paache and Badger…i opted for the Paache H single action/external mix with all 3 tips and braided 6’ hose…and i’ve never looked back…for numerous reasons.
Suffice it to say, it fits my hand quite comfortably, cleans easily and performs perfectly with all acrylic paints…
i lucked out and haven’t looked back since…good luck.
ps…there should be a place where you can try airbrushes before you buy.[8D]
That is all in the world that matters. Regardless of manufacturer, cost, features, or anything else, the only thing that matters is that it does what YOU want an airbrush to do and that YOU are happy with it.
That’s kind of how I am with Badger. I bought a model 200 about 10 years ago and then recently decided I wanted the control of a double action so I got another Badger (actually Thayer and Chandler). I like them, and they do what I want.
I know that a double-action ab is better than a single-action, but what is the reason for this? Just curious[:D]
well, here are my reasons for liking a double over a single action. you have control of the paint flow and airflow all in one trigger. its been my experience the when doing really fine line work like demarcation lines on a free hand cammo scheme or subtle weathering tecnniques, i’m constantly tweaking in the trigger to control paint flow as i’m going along which is totally not possible with a single action. a single action brush has a remote “dial” so to speak to control the paint flow and a separtate button to start the air flow and it is impossible to control it while in action. you have to stop, tweak the paint flow, start again, stop and so on and so on. i have a badger 200 and a paasche H that never get used once i learned the double action. you can also do “dagger” strokes which i use quite a bit during weathering and what a call a “dribble” line which goes from a thin line to a thick line back to a thin line and ect, ect. you just plain have more control and if you’ve never owned an airbrush then you wont know the difference as soon as you learn the double action. later.
Mike: i found that on the internet.
no i don’t think i sound like an atorny, its just a little humour
I assumed you did as that would take a long time to think up and type. [:D] [;)]
Mine was a little humor also. [(-D]
Mike