Every time I try to put on the very small decals I always have trouble with handling, positioning, etc. I’ve tried a few different approaches but no success. I know there are some very skilled, experienced people here so was hoping to get a few good tips on this.
yes- do what I do and throw them away and don’t fool with them. If you are referring to the tiny, unreadable stencil decals, they are nearly impossible to see, if you manage to get them applied at all. They will look like fly specs or just other imperfections on your paint job.
Well, I don’t throw them away. For some aircraft, the stencils really make the model “pop”. In fact, I search my spare decals stash for unused stencils all the time. After a brief soak in warm water, I transfer them from the paper backing with a small paint brush. When you’ve moved them into the position you want, gently touch a piece of torn paper towel close to the decal. This will wick away excess water. Now, if it’s in place, leave it alone for a while. If the decal needs help snugging down onto any detail, I use Model Master decal set, again using a small brush to very gently wet the decal. If you don’t want to use them send them to me![:D]
Gary
I like to use tweezers to hold the paper and use a toothpick to push them off. Still a pain though.
Those real small hobby q tips from Tamiya or Gunze really help, and they don’t leave fuzz on the model.
I have a pair of tweezers with very small, very sharp tips. I got them used, have never seen another set as nice, but they work great for small decals. Dont resist spending a decent amount on good tweezers. Unfortunately, buying online or from print catalog is sometimes hard, compared to a local shop where you can actually see and feel them.
I too use sharp tweezers, a brush and toothpick to position things. Just take your time and if you get annoyed, then take a break and come back in an hour or two or just put it away and continue tomorrow.