L.W.S . Update May 14. Pg. 3

Well helo again, finally got off my rear and got to the bench… I joined a GB. the Weathering GB over in GB’s of all places. I really need to get back to work after a break of almost 8 months.

Well my subject is the German LWS, Landes Wasser Schlepper, an amphibious vehicle designed in the 30’s and unarmoured.

I remember this subject first being released in the 1990’s as a resin kit. It’s a subject I have always wanted to build ever since I first seen it in the encylopedia of german armour.

When Hobby Boss brought out their offering as a plastic kit I still did not jump as it was very expensive for a plastic kit about €50 over here, I ended up getting one for about €20 or €30 can’t remember exactly how much.

I have always been a fan of Tony Greenland’s work, since the early to mid eighties I always considered his German models the best and always tried to copy his style. THe eighties also gave us Verlinden with the very stylistic drybrushing and heavy washes.

The 1990’s and 00’s gave us MIG, Phil Stuncinkas as just two names who shine in my opinion but thats just my opinion.

For this build I will try using my own take on various painting techniques, drybrushing washes pigments pastels. Chipping basically I want to try and marry old and new to my own personal taste.

The books I’m working from are as follows.

Tony Greenlands masterclass

Migs own FAQ

And this one by Games workshop written by Phil Stutcinkas, this is by far the best Modelling manual I have ever seen.

Now for my LWS progress.

THe kit built into sub-assemblies.

Sprayed from a rattle can for convenience.

I was going to paint the floor black or something lighter when I found a great Gamesworkshop colour graniite in their base colour set, its dark enough to imitate black but light enough to be easy to work with. This is it with a Tamiya flat earth wash.

As the vehicle I am modelling ended up in north africa and is probably the one that was captured by the British and brought to england then I believe I have a lot of leeway to “GO NUTS” weathering.

Well I started with a Vallejo light rust from the Panzer aces range.

THe Dash

In this image it can be seen where I have started to rust up the floor, light rust and dark brown, by not using Black as a base colour has made this easier, since this shot I have added a flesh wash and got a lot more into the weathering.

In this shot I wanted to break up the openess of the side so I painted scratches to look like a table or bench had been removed and the walls paint got damaged.

Thanks for dropping by and all comments are welcome.

This looks like it’s gonna be VERY interesting

That floor color, I’m gonna have to get me some of that

The idea for the painted scratches, that look like a table or bench has been removed, is very unique and original … MANY points for that!

And I don’t blame 'ya for using the rattlecan… I get lazy sometimes and just hate to crank up the airbrush even though I LOVE using it.

BTW,

I’m still in love with that Minenraumer you built a long while back.

!http://i20.photobucket.com/albums/b232/gluetank/Decorated%20images/th_Smileyavatar-bettereye.jpg?t=1294093447

Nice to see you back at the bench Terry and tackling an interesting/unique subject! Looking forward to seeing this one progress. [B]

Looks to be a nice kit. Have not seen one of these built up yet. Like what you have done so far and looking forward too more.

Thanks for the comments guys, I have got a bit done during the week so here we go,

First the bulkhead, Ihave over rusted this, there are two doors attached here later, an inner and outer. i decided that my vehicle maybe is the one evaluated back in England, so she is a couple of years old at this stage and well travelled.

I need to get to the next stage with this which will involve pigments.

A close up of the door way,

Just matched up to the floor to try keep some continunity to the weathering.

The driving/crew stations.

The start of the interior/upper shell. just brown paint at this stage,

Firstly stippled with a sponge//piece of foam.

Bigger bits hand painted in.

I gave the lower hull a quick wash of raw umber just to see how the detail stands out. I also gave it a quick streaking just to give myself a start. The streaking was just a piece of foam pulled through the wash.

THe wash dried.

Thanks for dropping by.

Regards,

Terry.

Very nice layering/blending effects going on here Terry, top notch! I also like the idea of using the sponge for the streaking, given how large the surfaces are you’re dealing with, I’m sure that was a real time-saver. [B]

This is going to be just AWESOME Terry. This looks like something you would expect to see in a background shot of “Raiders of the Lost Ark”.

You Go BoyThe damp environment of the weathering will make this build rustworthy I’m sure.

!http://i20.photobucket.com/albums/b232/gluetank/Decorated%20images/th_Smileyavatar-bettereye.jpg?t=1294093447

THanks Bill and Steve, I was looking at the photos and one thing I did not notice is actual bare metal. I’m off to include this where the doors would make contact with steel.

Terry.

Well, I got a fair bit done but I’m having some serious PC problems at the moment and don’t know when complete failure will happen.

I just want to post quickly some progress photos.

These are what I had done 'till yesterday, I got work done tonight but can’t work on the images yet.

I used lifecolor dust and rust set to create these rust effects. More work is needed.

The upper and lower interior just lined up to make sure the weathering is following some kind of line.

The inner roof section, the effect I’m trying to get is of a vehicle a couple of years old exposed to a salt water enviornment.

There are several roof hatches which will be left open and I want the viewer to see something other than a bland interior.

Sorry again for the quickness of the post but its late and this machine needs a full re-install.

thanks for looking, all comments welcome,

Regards,

Terry.

Terry

UM, UM, UM, Um, UMMMM

Very interesting.

I love rust like kids love candy… thank goodness all my teeth aren’t rotting out here.

Nonetheless, I’m eating this up like

(Some helpful advice Terry… I quit using band aids and got a MAC… 15 years now…and 4 years on this one… no crashes, no problems. Man, life is too short to mess with those pesky PC issues)

!http://i20.photobucket.com/albums/b232/gluetank/Animated/th_1-Animated-Disastermaster.gif?t=1296616998

Come on! We all know you are lying… you took the pictures at a museum. Maybe you won the rusted LWS parts via eBay and it is sitting in your backyard. The pictures look way too real. Aaron Skinner will nuke this if he finds out you have been lying… way TOO REAL!

[:D[[:D[[:D[

Hi ya Terry

I missed the beginning of this one but all caught up now. I too am very happy to see you back. I’ve picked up a lot of tips from you since coming to the dark side. Now we can start again.

I really love what you’ve done. It is interesting to see your rusting technique compared to say, scratchmods, but the results are quite convincing. I can see that kind of rust on a boat that is desperately in need of a paint job.

This looks great so far. An excellent eye for color and detail.

Definitely not a bland interior Terry, love where this one’s going…a true “rust bucket” that’s had its share of time at sea for sure. [Y]

Great work here. Love the effect you have achieved.

Bill, Steve, Andy, Marc,Kolschey and Rob thanks for thte positive comments its encouraging after such a long break from the bench. I was feeling a bit burned out.

Joining the weathering GB has been the kick in the rear I needed.

I have not been to the club in about 4 Years and online is where I now see whats happening.

Again thanks to everybody for the words of encouragement.

Terry.

Well I only got a quick update.

I started on different parts of the vehicle, mainly to try tie all the weathering together while keeping differences, sounds weird but it will become obvious as things progress. (I think)

The life preservers started, red is one of my hated colours.

The winch.

Some shading started on the hull

A close up of part of the roof inside, I calling this done.

Closer.

Thanks every body for the responses they are all appreciated.

Terry.

GAWD Terry…

This is just… … . what can I say?

If this doesn’t garner respect for your abilities…

…well, what would it would take?

Hell, I LUV it all.

That roof rust is just sweet

But here’s my “REAL” love…

http://i20.photobucket.com/albums/b242/terryburke/LWS%20Build%20Log/LWS047-1.jpg

Just to Hot-Dog it a bit, (show off) how about a wee bit 'o grease or oil stain running down on the casing from the axis of the crank? Those squid types are gonna polish the upper bottom edges a bit with their galoshers too.?

This worn & weathered piece of equipment is a jewel in the crown.

!http://i20.photobucket.com/albums/b232/gluetank/Animated/th_1-Animated-Disastermaster.gif?t=1296616998

GEEZ TERRY … I am so sorry and embarrassed your post got past me … sorry 'bro : (

I gotta be honest with you, I am not even familiar with your subject … but when it come to weathering and especially chipping such as in your pics, well all the technique is in your tutorial I have on disc ! this could be a tour de force for you my friend!! The pics so far are just beautiful and expertly done… : )

Dude, please e-mail me or get me on FB… I woulda hated to miss out on this great piece of Terry Burke art !

bill : )

I´ve fallen in love with that winch… is she married? [;)]

Jokes appart, a really nice work over that nive vehicle. Congratulations.