This kit was great to build. It was clean, crisp and had a little bit of hull texture to it. It went together easily. Only small issue ( and has been noted in some reviews) there wasn’t a whole lot of room for the tracks in between the hull and rollers.
Indy links were no big deal (once the dimples in my fingers came out)
I pre-shaded w/black primer
Tamiya acrylics XF- 61 Dark Green -airbrushed
Light buff dry brush and some artist oils
Great Kit ! [tup] I highly recommend
Jim
Before weathering
Couldn’t screw-up this barrel - goes either way [:-^]
Nice job Jim. Good work on the assembly and paint job. I have built the same kit from Dragon. I encountered some fit problems in mine (upper and lower hull) and the indy tracks required some special effort as they don’t fit quite well. But I agree that the details are good on this kit.
Thanks again for the comments. It is well appreciated
Caveman - Thanks. (got the barrel right) I used Tamiya xf-61 dark green w/light buff drybrush - tracks are Dragon individual limks (painted tamiya dark earth) - comes in most Dragon kits. They’re work to put together but I think well worth the effort - detail and ability to do track sag are great. No PE or aftermarket - straight out of box.
Erock - Thanks. I painted the whole thing (not the tracks) flat black - used testor’s flat black in a can. I found their spray from a can really adheres to plastic. Anything that is bare, I brush flat black into the tight spots. Then airbrushed the green onto the high spots - leaving the black in the low and recessed areas. (more shadow) I use dark brown as a primer when I use any dark yellow paint scheme. I found the yellow doesn’t cover as well and shows as a different color over black
Ron P - Thanks. No stretched sprues used in this kit either
Sherm - Thanks for the comments and the notice on the pics. I switched it as soon as I could. That Ron USMC is just too darn efficent.
Petbats - you’re right - composition is everything
Thanks again guys. I’ve picked up alot of stuff hanging out here. You’re comments are allways appreciated.
Hey, what’s that exhaust-like stain coming out of the large grille on top of the rear hull? Is that supposed to look like in real vehicles? Did that engine grille vent any black exhaust?