The Revell 96:1 Constitution is supposed to based on the 1812 version of the real ship and the gun port lids are solid instead of being in two pieces with holes for the cannons. Is this correct or were the lids changed to the two piece style in later years. Drawings in the “Anatomy of the ship-Constitution” shoe the two piece version. Did Revell just skip this for simpilicty?
Very interesting question with, I fear, no simple answer.
I haven’t seen the Anatomy of the Ship book yet, but a number of reviewers have had some negative things to say about it. I have the impression (I emphasize again that I haven’t seen the book itself) that the author ignored some important sources. I’d better drop the subject of that particular book there, till I’ve seen it.
To my knowledge the most definitive source on the subject of the *Constitution’*s appearance, and how it’s changed over the years, is Capt. (Ret.) Tyrone Martin. He was the ship’s commanding officer for a number of years in the 1970s, and his book about her, A Most Fortunate Ship (available now in a second, revised edition) is the best piece of scholarship about her that I know about. Captain Martin, on the basis of a great deal of research in primary written documents and contemporary illustrations, came to the rather surprising conclusion that she didn’t have hinged gunport lids at all during her early career. Apparently the ports were closed with some sort of temporarily fixed boards, rather than the hinged ones that I would have taken for granted.
The first time I read that one I found it hard to swallow. But I have a great deal of respect for Captain Martin. I also took a look at a number of contemporary pictures of other American frigates from the period. There aren’t many of them, but several of them (most notably those by the French artist Jean Jerome Baugean) are beautifully done and highly detailed. All the Baugean engravings of American sailing warships that I’ve happened to see have at least one thing in common: they don’t show any hint of gunport lids. Neither do most of the contemporary paintings of War of 1812 naval battles.
The Revell 1/96 Constitution is based on a set of plans drawn by George Campbell on commission from the Smithsonian, back in the late fifties or early sixties. Mr. Campbell was one of the best in the business; his plans certainly deserve to be taken seriously. He - quite correctly - used as one of his major sources of information the well-known “Isaac Hull Model” of the Constitution, now in the Peabody-Essex Museum in Salem, Massachusetts. The Smithsonian model has one-piece gunport lids (painted, if I remember correctly, yellow on the outsides and white on the insides). The Revell kit mimics that model - the modern one in the Smithsonian. But the old model in Salem doesn’t have gunport lids.
The latter in itself isn’t definitive. The level of detail on that model is extremely crude; I can easily believe that the guy who made it wasn’t up to the task of making miniature gunport hinges. (I suspect that was Mr. Campbell’s logic in adding the one-piece port lids to his plans.) But it does look to me like the preponderance of the evidence favors ports with no hinged lids.
The ports on the maindeck almost certainly had to be sealed with something when the guns were run in - especially in rough weather. But what those removable lids looked like, how they were fastened into place, and what was done with them when the ports were opened I have no idea.
One-piece hinged portlids certainly were in use well before 1812, and I think I’ve seen contemporary pictures of two-piece ones, with semi-circular cutouts for the gun muzzles, from about that time as well. If I were building a model of the Constitution in her War of 1812 configuration I think I’d be inclined to leave the lids off. But I don’t think anybody has an absolutely definitive answer to this one.
o.k… I am new to this forum but by reading this forum, Ive had alot of questions answered that have interested me for years. I am going to make a U.S.S. UNITED STATES by Monogram and I am using the Revell 1/96 model sort of as a guide to modify it to it
s 1812 appearance when she fought the H.M.S. Macedonia. I have come to the conclusion that the gunport stripe is yellow and that it goes half again below the gunports. I assumed ( and we know thats a big mistake ) that the the 2 piece gunports came into use later in the careers of the ships around the 1830
s or so. Am I wrong in this? Also, what were the inside of the bulwarks painted… dark green or did this depend on the individual captains on how they fit out their ships ? I started the process of cutting off the 2 piece gunport lids molded on the model several years ago and then stopped because I wasn`t sure … what a job.
I’m not aware of any good source that deals specifically with the United States. We know that she was built to the same design as the Constitution and President, with the notable exception that the U.S. was fitted with a “round house” (presumably something in the nature of a raised poop deck) to accommodate the quarters of a commodore. I think I’ve seen a couple of photos of her (taken very late in her career, just before the Civil War), but they were taken from a considerable distance and didn’t show much in the way of details. Some folks in Philadelphia have gotten extremely interested in the history of this ship, but if they’ve published anything about her precise appearance I haven’t seen it.
So about all I can suggest regarding the gunport lids is what I typed above, in reference to the Constitution. If I were trying to build a model of the U.S. in her War of 1812 configuration I’d probably leave the portlids off. Frankly, though, before I did that I’d probably do some more digging. I’m just not entirely comfortable with the image of those sailors plugging up the gunports with unhinged, temporary boards - in a period when the hinged gunport lid seems to have been in such common use. But I have too much respect for Captain Martin to ignore what he says.
Regarding the color of the bulwark interiors - it’s pretty clear that there wasn’t any official policy about such things in the U.S. Navy at the time. The inboard works of the Hull model in Salem are green. (I’m a little nervous about that one. I think the modeler - such as he was - had three pots of paint, black, white, and green, that he used for everything. I’m not convinced he was paying a great deal of attention to where each color ended up. On the other hand, Captain Martin seems to be pretty emphatic that Isaac Hull painted lots of stuff on board the ship green - including one of the small boats.) Whether Stephen Decatur followed Hull’s lead on board the U.S. I have no idea.
I’m aware of four colors that (I think) were in use at about that time on the interior bulwarks: yellow ochre (like H.M.S. Victory), red ochre (going out of fashion, but probably still in use), whitewash (not as common as it would be a few years later, but probably not unheard of), and green (like the Hull model). If I had to pick one, I’d be inclined to go with the green. But if I saw a model of the United States with its bulwarks painted in any of those colors, I certainly wouldn’t feel like I was in a position to say it was wrong.
Hello… thank you for your response. I was looking in the Time/Life book of Seafarers (Frigates ) and on page 25, there is a French painting of the U.S. frigate Constellation coming into port and it looks as if your statement of no gunport lids is correct by this painting. I can`t really tell if it has lids or not.There is another French painting on page 80 showing the President riding out a storm and also supports the 2 piece gunport lids because if you look at the side of the ship, there are the cannon barrels sticking out through closed lids ! What a quandry? Is it possible that when the ship were in a position of a pending battle that the captains had the gunport lids removed for less battle damage carnage and /or obtructions in the way of the guns due to damage ?
I also noticed going through this book that most of the gunport stripes were yellow and not white as it is often depicted. This is why MY models sit in various stages of completion because I get stuck on these small details. I love this forum… it has opened a whole source of info for me and I do love Plastic ship models. And also thank you, mr. Tilley for your knowledge. By the way, your Hancock model is beautiful. That`s what I aspire to…
Armchair Sailor - Many thanks for your kind remarks. I suppose the idea of unhinging the gunport lids is plausible - though I can see some practical objections. (I wouldn’t want to be the guy who had to dangle over the side of the hull knocking the hinge pins out.) If we’re correct on the “no lid” theory, maybe the removable, unhinged covers were in two parts - with semi-circular cutouts so the barrels could stick through them. That actually makes a lot of sense. I think I’ve seen references to two-piece gunport lids with cutouts as early as the beginning of the nineteenth century (though at the moment I couldn’t tell you where I saw them). A 24-pounder long gun, in its run-in position, takes up an enormous amount of valuable space on a deck, and in rough weather it’s considerably less stable than it would be if the front end of its carriage were lashed against the bulwark. We’ve all seen illustrations of how a gun could be secured with various tackles for foul weather, but if I were in charge of such a beast the idea of running it out, with some device to seal the port around it, would be mighty attractive to me.
I certainly sympathize with the “I’m-not-sure-how-to-do-this-accurately-so-I-think-I’ll-go-work-on-something-else” phenomenon. An author acquaintance of mine once made the observation that he never finished writing books; he abandoned them. The same goes for research projects. Sometime or other one has to say, “enough.” A few months, or a few years, later either you or somebody else may figure out how to do something better or more accurately. But if we all wait till we know every single snippet of information about the subject, no models will ever get built. Besides, part of the fun (to me, at least) of working with less-than-completely-documented subjects lies in the knowledge that there’s more than one way to interpret the evidence. I know of several other models of the Hancock by modelers who did just as much research about that ship as I did. All our models are a little different. I say that’s great. That’s one of the big reasons why I like to build ship models.
Hello to Jtilley and Armchair Sailor – This is a really great response to my first post on this forum and I want to thank you both. Maybe a little of my modeling history would be in order . I have already finished the Revell 96/1 Constitution (except for most of the rigging) and became so captivated with building a ship with so much history I decided to
build it again from scratch. So, I drew a set of plans for the 1812 version using AutoCad based on the plans in the “Anatomy of the Ship – USS Constitution” and plans for the Constitution, United States and President by Chapelle. The latter of these plans are all pre-1812 and do not show any gunport lids but the plans for the 1812 version in the book all show two piece lids with cut-outs (even detailed lid plans) where the Revell model has one piece lids with no cut-outs.
I have finished the hull to the water line and will be ready soon to build the gun port lids ( unless I leave them off) so this discussion is right to the point and very helpful.
“What a quandary?” is appropriate. I think I am going to order ” A most fortunate Ship” before doing anything on the lids.
Thanks again for the responses.
No, my thanks is to all of you. Ive finally decided as Mr. Tilley has stated that I could gather every snippet of info needed and then would n
t have any eyesite left because Ive waited too long to do anything. I absolutely love model ships , of any media , but I haven
t built a ship model in at least 20 years due to kids , life in general, and those dreaded details. As mentioned before, enough is enough and it`s time to bring out the U.S.S.United States and bring it to the battle readiness that is needed. I hear that a British frigate is cruising for a bruising and it is needed to defend our nation…
Go for it armchair sailor. I can send you my drawings and plans for the Constitution, United States and the President if it will help. By the way, what kind of gun port lids came with your Monogram model?
Jtilley - I just ordered the " A Most Fortunate Ship" and I have put my decision about gun port lids on hold for now. Thanks again for your help.
Popman:
Boy that Revell model really takes me back. I built two of those kits over the years, the first back in high school.
As for your gun port cover question, I have read quite a bit about the history of the vessel in her early career. I agree with john that the best source is Martin’s book. You will enjoy it as a good read as well.The man knows how to tell the story.
I think for the 1812 version, no port lids when the guns are run out is probably right. I know that early in her career, say during the Quasi War 1798-1801, she probably had removable port covers. These were simply set in place and had sliding bolts that went into mortices or iron rings in the ship’s side on the inside. These bolts held the covers against the ship’s side from the inside. To remove, slide the bolts out of their holes or rings and pull the cover out. Later in her career, perhaps after the War of 1812, she was fitted with those double port covers. I think they were divided into upper and lower halves and when in place there was a hole in the middle where the muzzle could poke out. I am not sure of the time line when these were employed, though. It is odd to say that, for a ship so famous, there are so many holes in her history.
Russ
Another book I strongly recommend is Old Ironsides: The Rise, Decline, and Resurrection of the U.S.S. Constitution, by Thomas C. Gillmer. Mr. Gillmer is a retired professor of naval architecture at the Naval Academy and, at the Navy’s behest, did a thorough study of the ship’s structure in conjunction with the latest major restoration project in the 1990s. The text of the book, in addition to narrating the events of the ship’s career (again), contains a lengthy and interesting section on Mr. Gillmer’s findings - including some material on how she’s been modified over the years. Due to the nature of his assignment (to figure out a way to keep the hull from falling apart) he was more interested in major structural items than details like gunport lids, but the information is fascinating and Mr. Gillmer’s credentials are unquestionable. The book also contains a number of beautiful sketches and watercolors by the outstanding modern marine artist William Gilkerson, who has spent a good deal of time studying such things as the *Constitution’*s changing color schemes. (He shows her with a white gunport stripe during most of the War of 1812, but a yellow one toward the end of it. And no gunport lids.)
I’m going to order a copy of the Anatomy of the Ship volume. On the basis of what I’ve read about it, it sounds like the author did a fine job on the drawings but didn’t do enough research. That was the also the case with the first edition of the volume on H.M.S. Victory in the same series. In that case Conway, the publisher, responded to the rather loud criticisms by publishing a revised edtion that corrected the errors. Let’s hope the same thing will happen this time around.
Thank you for your offer but I don`t think I will need them. I have the Howard Chappelle books and have the drawings in that particular book. I am curious about the book " A Most Fortunate Ship " though.
The Monogram model has the 2 piece gunports moulded into the sides of the hull and when I pulled the model out last night , I noticed that I had finished removing the lids off one side of the hull but hadn`t started the other side. Sanding may be a little difficult because of details that may be removed but I inspired to go at it again and finish it.
My desire is to make it a waterline model in a small diorama. I have to say that my inspiration originally was Donald McNarrys book with his U.S.S.Constitution ( the one without sails ) I think this is one of the most beautiful models made of this ship ( and it doesn
t have a white gunport stripe ) That is what got me to digging in to it more because of his way of interpreting the info he got ahold of and the model he made. So I think it`s time to make a ship…
Hello JTilley, Thanks for the help and I will await your review of the “Anatomy of the ship”. Could you tell me how to find your ship builds in the gallery.
Thanks,
Don
I’m not sure I’d presume to review that book here in the Forum, but I did order a copy of it today. I’m hoping to be pleasantly surprised. I’ve read some less-than-enthusiastic comments on it elsewhere.
I haven’t posted any pictures in this Forum, but here are links to shots of three of my models (actually the only three sailing ships I’ve got at present).
This thread of the FSM Forum contains an overall shot (courtesy of our friend Michel vrtg) of H.M.S. Bounty. The model is based on the ancient Revell kit (or, more accurately, seven pieces of it). The scale is 1/110 (slightly larger than 3/32" = 1’).
http://www.finescale.com/FSM/CS/forums/564972/ShowPost.aspx
Here are some shots of my last one, the New York pilot schooner Phantom. It’s based on the now-defunct Model Shipways resin-hull kit. (MS now sells a version of the same kit with a solid wood hull.) The scale is 1/8" = 1’ (1/96).
http://gallery.drydockmodels.com/album195
And here are several shots of my one scratchbuilt model, the Continental frigate Hancock, on the scale of 3/32"=1’ (1/128).
http://gallery.drydockmodels.com/album194
Hope these are of some interest. Comments are, of course, more than welcome.
That’s a FINE Hancock, sir.
I did not mean a formal review on the forum. I meant a review of the drawings in relation to my questions about the gun port lids.
I really admire your models, particularly the Hancock which you built from scratch. Did you have plans to work from? As I mentioned before, I am scratch building the Constitution but I did AutoCad drawings from the plans in the Anatomy of the Ship book to work from so I could change scales and get dimensions for building. This is where the many diferences appear between the book plans and the Revell 96/1 model including the gun port lids.
Popman - Many thanks! The Hancock model is based directly on the drawings of Howard I. Chapelle, which were published in his book, The History of the American Sailing Navy, back in 1949.
Chapelle was Curator of Transportation at the Smithsonian Institution, to which he left all (I think) of his original drawings. The Smithsonian sells blueline copies. When I was getting ready to build that model I ordered copies of those particular drawings, which include the hull lines, outboard and inboard profiles, a scrap view of the transom, and deck plans (no masts or rigging). The prints were on 1/48 scale; I took them to an architectural drafting firm (this was in about 1977 - before big, reducing photocopy machines were common) and had them reduced photographically. I bought lots of copies, and cut them up to make templates.
Chapelle apparently traced (and to some extent cleaned up) the Admiralty drawings made by the British after the ship’s capture. The originals (on drafting cloth) are part of the collection at the National Maritime Museum in Greenwich, London. They’ve been reproduced in several books and articles. I kept one of those reproductions on hand as a check on Chapelle, who had a nasty habit of changing small features he found on old plans because he thought they didn’t make sense. (More recent research has established that he was often mistaken.) The most prominent example in this case was the shape of the ship’s bow at the level of the forecastle deck. As can be seen in the model photos, it has a rather odd, curved configuration that Chapelle, for some reason, didn’t copy quite right in his plans. He also added some questionable details (gratings in the platforms at the end of the gangways, for instance) and omitted others. (The Admiralty deck plans show the thickness of the bulwarks. Chapelle doesn’t.)
Chapelle’s drawings are far easier to work from than the original Admiralty ones. (Eighteenth-century drafting cloth has stretched and shrunk by now, and those old draftsmen were notorious for their use of ivory rulers and scales. Ivory is slightly hygroscopic; measurements taken with instruments like that aren’t to be relied upon.) My suggestion to any modern modeler dealing with a subject that’s covered in a Chapelle drawing: use Chapelle as your working drawings, but check on his sources if possible.
Contemporary eighteenth-century sail plans are rare. For my little Hancock model I used the spar dimensions of the frigate Raleigh, which was built at the same time in Portsmouth, New Hampshire (not far from Newburyport, Massachusetts, where the Hancock was built). The *Raleigh’*s spar dimensions are included in a fascinating “Inventory” of her equipment that was published years ago in The American Neptune.
There’s one other contemporary pictorial source regarding the Hancock: a series of four oil paintings, believed to be the work of Francis Holman, now in the Peabody-Essex Museum of Salem, Massachusetts. The paintings depict the battle in which the Hancock was captured; they may have been commissioned by the captain of H.M.S. Flora, one of the British ships involved in the action. Those paintings don’t show the Hancock in much detail (and they represent her inconsistently), but looking at them at least brings the modeler a little closer to the subject.
I suspect that’s more than anybody wanted to know about this topic - especially in a thread that started out concentrating on the Constitution’s gunport lids. Sorry about that.
Regarding the yellow vs. white gun stripe. The story I’ve read was that Issac Hull had the stripe painted white to make the Constitution look different from the other US frigates with yellow stripes. After the victory over the HMS Guerriere and William Bambridge assumed command, the stripe was repainted yellow. In part, if my memory serves, because the Royal Navy was on the hunt for a white striped USN frigate. I second my friend John’s recommendation of Captain Martin’s book. We discovered it about the same time years ago. In addition to all the information about the ship, there are lots of funny stories from the ship’s long life. A very enjoyable read. Mike
Hi, again , gentlemen. Going back to the Time/Life “seafarers” book, on pages 90 thru 93, the paintings of the victory of the Constitution over the Guierriere were reproduced by the publishers and it definately shows a yellow stripe down the gunports. These paintings were commissioned by Capt. Hull so I have to assume that they were yellow at this time. But, I`ve seen the paintings of the Constitution over the Java and I remember them being white. You may be correct but just the wrong battle. No gunport lids that I can see though.
Has anyone out there built the Monogram version of the Constitution or United States ? Id be interested in what was done. I know that the Revell version is easier to work with because I
ve built 3 of the smaller ones in my lifetime. I havent built the 1/96 version though over the years I
ve acquirred 3 Constitutions, and 2 United states in various conditions being already built and destroyed. ( one from a cat of mine who ,I think, is a British agent for the King ! )
That reminds me of my first build of the Revell Cutty Sark in the 60’s. I carried it with me thru 3 moves in 3 states but it fell to a beach ball fight between the kids. I built the Cutty Sark again about ten years ago from a Scientific Models kit and it is still standing although I heard that Scienfific Models has gone down or been bought out.