CHARLES W. M. The best whale hunter and transformer oil from 1841 to 1863
Modelo / PS Plastic
Scale:
1/110
400mm
271 parts
Can you tell us what brand of kit is this - Revell?
Thanks!
Yes
Revell 5094
A.Alexandre
Looks good[;)]
Nice…woulda been cool to have scratched a couple of humpback whale carcasses being sliced up along side her…
E. Von
Is not cool to have scratched whals these days
But in the early XIX century whale oil was the energy source for lighting needs
A.Alexandre
I’ve been on that ship. I was taken to Mystic back in the late 60s by some friends of the family. At that time it had fake gun ports painted on its side against a white band. It’s smaller that you would think and at the time it still smelled from its work load.
There are reports that this ship smuggling, refugees and migrants adjusted
The ship was towed to Mystic from Roundn Hill in November 1941 and became a museum ship
They never said anything about smuggling during the tour. The gunports were painted on to give the appearance of a warship and detr others from trying to take her cargo.
The simulation of the mouths of fire doors were a very effective because this ship was often the target of attempted attacks by pirates and even cannibals in the Indian Ocean
But what I impresión is the ability capture , about 8.661.700 liters of oil and 69 ton of whale, bones in just 40 trips that ship with 30 men aboard
Not forgetting that at the time there were 650 to 700 whaling ships
If you’re ever in the area you should go to Mystic and see the Morgan. They had the ship from the Tea Party across the dock.along with a couple others.
Unfortunately I never had the opportunity to see Morgan, but I was in Portsmouth in 1968 to visit Victory
Now I’m far from Mystic in Loures Portugal
Good use of the party
A.Alexandre
Nicely finished model, I like the sheen you’ve got to the painted decks. I know little about American Whalers- was this a common feature of the type?
Will
Yes all own browser in Pacific, Indian and south Atlantic to bring oil and whale bones were of this type with the furnace, balcony with 3 masts
The south of the Atlantic, some had only two masts
That’s an interesting question. It’s certain that there was some ‘spillage’ in casking up the rendered oil. An oiled deck would be water-repellant, too. Would not be a stretch to imagine that some ship-masters might have called for some oil on the decks when they were scrubbed.
I shot three rolls of film in my one visit to Mystic Seaport in August 1980; sadly there was a problem when they were developed and all were blank. And now, thirty-one years’ later, I’ve only the vaguest recollection of the appearance of Morgan’s main deck. One too many tall ships’ decks in my head, too, from Star of India to Elissa.
Never thought about the effects of spillage, but good point. I wa referring more to painting the decks rather than maintaining bare wood. It was a common in the 19th+20th century on British working boats, for labour saving reasons more than anything. See below picture.
The color is a ligth gray is lighter than the picture shows
The kit advised (sandy yellow mat RAL 1024)
I chose this color and brightness for reasons of reliability to the reality (no new paint wear)
I have just got back form spending an entire day at the annual wooden boat show at Mystic. With your question in mind I paid particular attention to the decks of the various ships and boats. The Morgan has oiled wood decks - probably southern yellow pine. The schooner Armistad has an unfinished teak deck. The schooner Dunton and various fishing boats have oiled wood decks. Many of the pleasure boats have unfinished teak.
The oiled wood or teak makes sense. I have encountered nothing more slippery than a smooth painted deck with water on it. The Nantucket sea captains were known for their frugality. If they could avoid painting the decks they would have.
As for color, the teak decks have turned a light gray. Depending on how recently they were oiled, the oiled decks vary in color from almost black to a medium gray. The Morgan’s deck varies in color with some ares dark and some light.
Hope thie helps
Amphib
AHere is the color of my deck Morgan with natural light!
Beautiful model! Well done!
What is the big ship aside CWM in the first picture?
Concerning the color of wood and decks - I think I have been reading a thousand posts discussing which color is “right” and which is “wrong”. [:S] … ignoring the fact, that wood looks different depending on wether its wet, try, old, new, …
I learned that decks almost daily were “whitened” or “holy stoned” - which is a procedure in which the sailors - on their knees - are almost sanding the deck with “the holy stone”. And a lot of water had to be used to wash away the stock removal. Another reason for the intensive use of water during the “cleaning” operation was caused by the need to keep the wood in a certain dampness. The wood - if drying - would shrink and open gaps. To keep it within a cerain level of “humitiy” would extend the ships lifetime - and theirfor the sailors lifetime 
I too started the model - and I will try to test a method to bring out the (plasic-imitation) wood which I was learning from Les Wilkins "How to build a Plastic Model Ship". I hope it works out - have to learn how to do it. Although I know that grain in 1/110 is not realistic I feel that it is important to let it recognizable (is this a real word?) since it helps to let the viewer have the impression to look at a real wooden building - and not a piece of plastic.
I love to see this kit build. There are so many HMS Victory´s and Soleil Royals out there in the world wide web - and so few American sailors as CWM or the USS Constitution in it´s different kits.