My first model getting back into this. I’ve painted and assembled the engine, and am modifying the seat because the kit seat doesn’t look like the bucket seat that was used. I’m taking scrap styrene to make the sides of the seat, will blend it in, clean up the bottom, ad some masking tape seats and I’ll call it done. Next time I’m back at home the work will continue, hopefully I can scratch build some sort of a rudimentry cockpit, especially to not be able to look down from the top of the cockpit and see the landing gear. Sorry for the lousy cell phone pics, I’ll take pics with my camera next time. Feels good to be getting back into this. I spent more to get set up with all the tools than the model
Welcome back to the hobby and welcome to the forums. Appears to me that you’re off to an excellent start. Good work on dressing up the seat. Yeah, it sure is easy to drop a healthy load of cash on tools, paints, gizmos, etc… so that we can thoroughly enjoy our styrene habit.[:|] You’re doing great. Keep it coming.
By the way, I love your avatar. I love the PBY. My father flew it during and after the war.
Thanks guys, hopefully I can build it up to the quality that I’ve seen from others. I’ll keep posting updates. Yeah the PBY is one of my favorites Would love to fly that instead of the stupid regional jet that I’m stuck in.
Thanks everyone for the kind words, I really enjoy this hobby. Made some progress. I scratch build some sort of a bulkhead so that when viewed from the top, the landing gear couldn’t be seen. I think the Wildcats had a system of gears to retract the landing gear, so using some spare sprue from the tree, I glued some pieces and cut them down to the proper height, also added some pieces to simulate strenghtening stringers, all of this was painted and washed, and using a silver Sharpie, added some chips. The cockpit received a pieces of sprue for an insturment panel and some sort of an electronics box. Also made seatbelts and a harness from masking tape. I know that my efforts are far from accurate, but I was a bit lazy to look at reference photos and I just wanted to make it look better than it was; hopefully my efforts have paid off. Wings and horizontal stabs were attached after the fuselage was closed up. Rescribed what sections of panel lines were erased due to sanding. My most used tools have been the contour gage, silver sharpie (detecting problems in the seams), Mr Surfacer 1000 (still trying to figure out how to properly use it) and Tamiya Extra Thin Cement (which I use to clean up the burs after rescribing). Here are the pics in no particular order.
Next task is prep for paint. I’m going to try to do some preshading. Just because I was out of this for a while, didn’t mean I stalked this forum and watched a lot of How to videos on utube. I’m happy with this so far.
Very cool how you closed up the landing gear bay. I’ll file your solution for future referance if you don’t mind because I have an F-6f in the stash.
I, like you, enjoy trying new techniques for the first time . I’ve been at this for about 2 years now and each model I build employs something I haven’t tried before. Thanks to the good people on here with their myriad of advice , each model is getting better than the one before. I am struggling through an old monogram 1/48 B-26 kit and every step of the way I ‘m receiving great how-to advice. My "firsts’ on this kit include the use of Miliput putty, dealing with difficult fit issues, re-doing raised panel lines, and the use of extensive PE all completed semi-successfuly with the help of the experts here. My next new technique to try is pre shading with an air brush . Wish me luck and I do the same for you and the F4-F.
This is one of those kits I always seem to put back on the shelf before I leave the hobby shop. Im really looking forward to the completed build, maybe you’ll change my mind so I can purchase it. lol
Great job with the little cockpit, the belts really do make a difference in the added detail.
First, sorry for my posts being so photo heavy. I finally got some paint on, but however the primer I used is being very naughty, so I might end up stripping the whole thing and starting over. The paint flaked off in some areas pretty badly, and my desire to give everything the best effort and not accepting half assed work makes want to redo it. I tried for the first time to preshade the panels, which until I saw with my own eyes the effect, I didn’t care for, but I think from now on I will do this.
I attempting to scratch build a base that is supposed to be a section of flight deck of an aircraft carrier. I found this square tin at Hobby Lobby for $3, and some square .083" (which I believe is the correct scale width for timber decking on WW2 flight decks) and some light gray paint from a spray can that looked like the correct shade for the hulls of Navy ships. Used all Rustolem enamel spray cans, red/brown rusty metal primer, light gray, and black for the base beneath of the timbers. I’m not sure if someone makes tie down beams, but I’ll look around. Also the timbers aren’t thick enough, so I have to go back and raise the wood somehow to be even with the top of the lid.
I need to try to somehow weather the wood and the sides, make it resemble a ship, so I’ll go to the ship forum and see what others are doing.
So clever with the tin idea. Thanks so much for sharing it wih us and your build is coming along nicely.
Just a small suggestion to maybe save some time. Evergreen has styreene that resembles your slated decking in rectangular sheets…not sure on the size. But maybe you can simply cut the sheet for the tin box size you need and voila, a slated deck.
I spent more to get set up with all the tools than the model 
