Hello Aardvark - thanks a lot for your message!
Snow cat? Sure sounds surprising, but I have seen photos of people doing it 1:1…
The Revell model is much more detailed than the Hasegawa. Then again, Hasegawa has a solid, one-piece body that sometimes is better if you want to hack it up. Revell is better if you want to show open doors or something like that.
So good luck with your project and please be sure to post some photos! Thanks for your kind words and have a nice day
Paweł
Awesome job
Hello crown r n7!
Thanks a lot, glad you like it! After a week the paint should be more or less dry, now I will try to put the flames on, since nobody has any problem with that (maybe with the exceptions of my woman…). Then I want to clear-coat it.
Thanks for reading, have a nice day
Paweł
Hello everybody!
It’s been a month since the last update - a time filled with thrill and adventure!
As I expected, putting on the decals (it’s Hasegawa!) didn’t go as smooth as I wished. I still don’t know how to work with them, I’ll have to make it my next research project. What I know is you can use MicroSet on those decals, sparingly, but what you can’t do is to soak 'em up in decal solution and wait for the solution to do it’s work. This causes Hasegawa decals to wrinkle up badly and then they stay this way. Want to know how I found out?
Here is my bus after putting the decals on:
Looks quite nice from far away, but once you look closer… Plus the rear flame wrinkled beyound any repair from MicroSet alone:
Here’s when the time came for tough decisions. I decided to remove the “middle” flames and just keep the top and bottom ones, because they went on best. I figured less is more here. I soaked the decals to be removed with solvaset and took them down with an old toothbrush.
After that I put on about four layers of Gunze Top Coat Gloss from a spray bottle, with some sanding with 2500 grit sandpaper between the coats, trying to blend the somewhat thick decals in. Lots of drying time between the coats, too - this is why it took me so long to post the next update. After the last coat had a few days to dry I sanded the orange peel with 2500 grit sandpaper, let it dry one day more and then I polished the scratches out with “Tempo” polishing compound - it’s a very nice compound made in Czech republic. Here are the results:
Nice sky reflection, eh?
Now I can finally fit the glass and put everything together. Thanks for looking and have a nice day
Paweł
That looks pretty dang good Pawel. I like the flames on the topside. Nice work man! [Y]
Thanks a lot for your kind words, Joe! Now I’m thrilled about putting it all together!
Paweł
Looks almost nicer than the factory finish.
That blue is spot on the factory color. But, I do not remember that much clear coating on it [:)]
Mind, I bought all my VW in junkyards, not dealerships, and that was more than 40 years agao, so, my recollections may be skewed.
[:D[ WOW Pawel, what a sptacular job of “flamming” and finishing the paint coat.
Dobra robota (per Google 
)
Nice coat of finish on her. I especially love the flames. Great job sir.
Toshi
Hello everybody!
After days of silence here I almost lost hope, so thanks a lot gennulmen, for your kind comments!
Capn - I was hoping to do that - to get a finish nicer than factory on a custom! So thanks a lot. Ahh, the old days - when cars were repairable, isn’t it so, Capn? Nowadays even if you can straighten the sheet metal, get all the hard-to-get parts including the electronics, you still have to get past all the coding to make everything work - or to make anything at all work… Thanks a lot for your comment!
Steve - thanks a lot! I’d like to hear “dobra robota” everyday!
Toshi - thank you very much! And please call me Paweł - Sir is way to official for me!
This is a good moment for a little update. Side mirrors - even though it is a Hasegawa kit, it was easier to scratchbuild new mirrors than to clean up (and rechrome!) the OOB mirrors. I made their posts out of wire and used my dremel to turn out the round parts. The mirrors themselves are BMF, and the chrome is a cheap spray paint:
As you can see, the OOB mirror has a nasty sink mark, fairly large sprue attachment point and the worst - there is a hinge/mirror attachment point molded on. This little part should be body colour, not chrome. That’s why I built the hinge out of 1,5mm styrene and painted it together with the body. It’s pointed to in the picture below by the red arrow. On the same picture you can see the painted door window framing - that’s Gunze Mr Metal Color chrome silver and Humbrol 33 black:
I also finally made the exhaust, together with the final muffler. The muffler was painted with a mixture of Humbrol 53 Gun Metal and Humbrol 186 brown. The exhaust pipes are 2mm brass tubing painted with the same cheap spray:
To mount it I had to modify the rear bumper. I didn’t want to touch it because of the chrome, but I had to, anyway, because it had really nasty mold seams on its ends. It got the same cheap spray treatment the mirrors and the pipes got, but I think maybe I will have to redo it:
And that’s it for now - thanks a lot for reading and have a nice day
Paweł
Hello!
I started putting it all together - I have installed the glass and put on most of the chrome. Now it starts to look like a car:
I have used white glue in places where spillage of other type of glue might mean a little disaster. I have managed to glue the door handles and winshield wipers (at their axles!) with CA glue, though. I removed the chrome from the contact points with a glass fibre pen. The next photo shows the model a little dusty - sorry about that:
Now - on to finish the interior! Thanks for lookin’ and have a nice day
Paweł
Hello!
I have finally installed the engine and put on the wheels. I also installed my scratchbuilt schock absorbers - they are painted yellow:
In the photo below you can see the complete chassis with the wheels - only thing missing is the front cover - that will be installed after I mate the chassis to the body
I have also installed the glass, the headliner and the interior. The headliner is made out of yoghurt can lid - it’s this funny wrinkled aluminium foil. It can be embossed really well and has an interesting texture to it. It is painted with Motip primer gray - makes the interior a little brighter:
I have also installed the scratchbuilt sun shades and interior handles. The air heating tube is also there. In process I discovered that I have lost the emergency brake handle, so I had to scratchbuild it one more time:
I have also finally re-chromed the bumpers - this time with Alclad 2. Much better now:
So now I’m actually only waiting for my custom-printed decals to do the tags on this one. I hope to have this baby done before the end of the year! Thanks for looking and have a nice day
Paweł
Nice touch with the interior detailing. That Alclad chrome is Boss! I gotta get some of that.
SprueOne - thanks a lot for your kind words! Alclad Chrome sure is handy to have around, sometimes it’s the only way to go. Thanks for your comment and have a nice day
Paweł
Hello everybody!
I wanted to finish this one before the end of the year, but I was waiting for my custom decals. Those got delayed more than four weeks, but they finally got to me in the post:
As you can see I’m also building an Army chopper in parallel. I slapped the decals on the VW and the model was done. I have also built a display base for it. An acrylic display case fits snugly around this base - you see I’m going to put that model at work, where we build 1:1 modern VWs. The Tarmac is made out of 800 grade sandpaper:
And that would be it - sure took longer than I expected! Thanks for looking and have a nice day
Paweł
That’s a really cool bus Pawel; very interesting details and a great finished model. I always enjoy following your builds.
Mike
Pawel
Great looking build my friend. Well planned and executed!! [Y][Y]
Looks good Pawel. I used to mess with 1/1 old VWs and there’s a place in my heart for them. Real VWs projects take up too much room in the shop (LOL) so I’m back to modeling and small motorcycles.
It looks almost ready to drive!
Max
Superb Pawel, very well done, it looks just great!
Mike, Hunter, Max, Pat - thanks a lot for your comments and for your kind words!
Mike - I appreciate it, please drop by anytime you like!
Max - 1:1 cars sure take up some shop space! But it’s fun to work on them if you got the right tools.
Thanks again and have a nice day
Paweł